Welltech ePBX80 V.1.1 - Manual (Page 60)

Welltech Technology Co., Ltd. 60
3.2.6 SIP Trunk Registration
SIP Trunk is used for ePBX80 to register to other systems only, such as remote ITSP’s SIP
Server or remote location’s IP-PBX ePBX80 through IP network. SIP Trunk Registration
screen shows information of SIP Trunks. You will see the registered Line Number, Account
and Server IP address, port number and the Register Status. Press Add to create a new
Trunk or Modify the specified SIP Trunk. Press Delete will delete the specified SIP Trunk.
To change your SIP Trunk Setting, click Configuration, and then click the SIP Trunk
Setting table. The screen appears as shown below.
Figure 3.2.6-1 SIP Trunk Registration page
The following table describes the table in this screen
Table 3.2.6-1 SIP Trunk Setting
Label Description
Select Select this check box to modify or delete it.
Line Number This field shows the Line Number information to access this SIP
Trunk.
Account This field shows the Account information.
IP Address/DNS This field shows the IP Address or DNS information.
Port This field shows the Port information.
Status This field shows the Status information to register to remote
device.
Add Click Add button to display a new SIP Trunk Setting screen.
Modify Register to remote Server information can be modified by
clicking the Modify button.
Delete Register to remote Server information can be deleted by
clicking the Delete button.
Total Count This field shows Total Count information.
Number Search Enter the search number, then click enter key. The screen will
display matched search data.