4 network, 1 network, Figure 3.4.1-1 network setting – Welltech ePBX80 V.1.1 User Manual
Page 77: Table 3.4.1-1 network setting
Welltech Technology Co., Ltd.
77
3.4 Network
The Network screens can see the configuration Network and DDNS Server status.
3.4.1 Network
To change your Network Setting, click
Network Network Setting
table. The screen
appears as above.
Figure 3.4.1-1 Network Setting
The following table describes the table in this screen
Table 3.4.1-1 Network Setting
Label
Description
WAN
Mode
Select ePBX80 WAN port network mode to be
Fixed IP or DHCP
or PPPoE
.
IP Address
Enter the IP Address if Fixed IP mode was set.
Subnet Mask
Enter the Subnet Mask Address if Fixed IP mode was set.
Default Gateway
Enter the Default Gateway Address if Fixed IP mode was set.
Primary DNS
Enter the IP address for Primary DNS. The default is
168.95.1.1.
Secondary DNS
Enter the IP address for Secondary DNS.
The default is null.
Default Gateway
Backup
Select Enable option, if any connection problem occurred on
primary default gateway connections, all the traffic will be