Welltech ePBX80 V.1.1 - Manual (Page 61)

Welltech Technology Co., Ltd. 61
Total Page This field shows Total Page information.
Page This field shows Page Number information. You can Enter page
number, then click enter key. The screen will display this page
data.
Next/Prev Click the Next/Prev to Next/Previous Page. The system will
auto display the Next or Previous Information.
Example 1: Disable SIP Trunk Setting
In SIP Trunk Setting table. Click Add or Modify. The screen appears as shown below.
Add New SIP Trunk or modify one to configure ePBX80 register to IP Telephony Service
provider(ITSP). ITSP will provide related account information for ePBX80 to register.
After disable this SIP Trunk, both outgoing call and incoming call don’t allow to go through
this trunk.
Click Add or Modify. The screen appears as shown.
Figure 3.2.6-2 SIP Trunk Setting
The following table describes the table in this screen.
Table 3.2.6-2 SIP Trunk Setting
Label Description
Enable Check to enable this SIP Trunk. Blank to Disable.
Line Number Line Number for registering to ITSP SIP Server or neighbor
IP-PBX.
Account Account Name or ID for registering to ITSP SIP Server or
neighbor IP-PBX.
Password Account Password for registering to ITSP SIP Server or
neighbor IP-PBX.