Welltech ePBX80 V.1.1 - Manual (Page 85)

Welltech Technology Co., Ltd. 85
3.5.4 Security
To change your Security Settings, click Management, and then click the Security table.
The screen appears as follows.
Figure 3.5.4-1 Security
The following table describes the feature in this screen.
Table 3.5.4-1Security
Label Description
HTTP
Http Port Enter the port number in which You can change the Http port
for ePBX80.
Default is 10087 .
Note: After Changing the Http port, you should reboot your
ePBX80 manually to activate Http Port setting.
Web Title Enter the display name of Web Title
User ID Enter the User ID. Default is root .
Password Enter the Password. Default is root .
Telnet
Telnet Port Enter the port number which You can change the Telnet port for
ePBX80.
Default is 23 .
User ID Enter the User ID. Default is root .
Password Enter the Password. Default is root .