Welltech ePBX80 V.1.1 - Manual (Page 65)

Welltech Technology Co., Ltd. 65
Click Add or Modify. The screen appears as follows.
Figure 3.2.7-1 Outgoing Routing
The following table describes the table in this screen
Table 3.2.7-2 Outgoing Routing
Label Description
Prefix Set up prefix number for routing rule.
Digits Length Set up the digit length of dialed number, if user doesn’t want to
limit the length, please set up this parameter to 0.
The
maximum length is 20.
Note:
If you set up the Digits Length as a specific value, such as 10,
the dialed number digits length should full match to 10, or you
can set up the Digits Length to 0 to ignore the digits length
limitation.
Office Selected allowable outgoing call office or location.
Template Copy It will copy settings for below Basic Setting and Routed
Features based on the other Outgoing Routing record.
Basic Setting
Primary, Secondary, There are up to 8 priorities for each routing rule, if ePBX80 fails