Welltech ePBX80 V.1.1 - Manual (Page 87)

Welltech Technology Co., Ltd. 87
3.5.6 Music Upload
You can customize Ring Back Tone by uploading new wave file on ePBX80. Please record
wave file format as both PCM
and G729. Channel Mode: Mono, Frequency: 8K, Bit Rate: 16
bits. And the file size must less than 2 Mbytes .
Click Management, and then click the Music Upload table. The screen appears as
shown.
Figure 3.5.6-1 Music Upload
The following table describes the feature in this screen.
Table 3.5.6-1 Music Upload
Label Description
Hold Tone/Music RBT Select this option to upload ePBX80 Hold Tone or Music RBT file
from your computer. The default is Application .
Music Upload
File Type in the location of the file you want to upload in this field or
click the Browse button to find it.
Browse Click Browser to find the file you want to upload.
Apply Click the Apply button to begin the upload process. This
process may take about two minutes.
Cancel Click the Cancel button to exit this screen without saving.
Note:
 After uploading successfully, on screen will show up related information. Please reboot
system to renew settings.