Welltech ePBX80 V.1.1 - Manual (Page 15)

Welltech Technology Co., Ltd. 15
2.1.2 Extension Configuration
Both Line Setting (built-in 8-port and 4-port FXO Gateway) and external SIP
extensions (up to 60 IP devices) have to configure its unique account to register on
ePBX80. To configure Extension account, click Configuration, and then click the
Extension table. The screen appears as follows.
Figure 2.1.2-1 Line Setting (up to 8 Lines)
Line Setting (built-in 8-port FXO Gateway) only support configuration built-in up to 8
Lines FXO gateway parameters. Both External FXO Gateway device (via local LAN port)
and Remote FXO Gateway devices (via Internet) register on ePBX80, Only use SIP Trunk
command to configure.
Figure 2.1.2-2 SIP Extension (up to 60 external IP devices)
The following table describes the features in this screen.
Table 2.1.2-1 Line Setting
Label Description
Select
Select this check box, then modify or delete each FXO line. The
total amount was limited to 8.
Line ID
This field shows the Line ID from 1 to 8 which is reference to
connection port at front and rear panel.
Line Number
This field shows the Line Number which is not a PSTN number
or PBX extension number.
Instead, this number is for ePBX80
internal SIP account used only.