Welltech FXSO Gateway In SIP V.1.2 User Manual
Page 85

FXSO SIP Gateway User Manual
Document Ver.: 102
Released Dec., 2004
83
-rbt ringback tone configuration set .
-bt busy tone configuration set .
-dt dial tone configuration set .
-2dt second dial tone configuration set .
-flash flash configuration set .
Note:
ringing frequency : 15 ~ 100 (Unit : Hz)
ringing ring ON/OFF : 0 ~ 8000 (Unit : ms)
ringing level : 0 ~ 94 (Unit : V)
tone frequency : 0 ~ 65535 (Unit : Hz)
tone freqLevel : 0 ~ 65535 (Unit : mVrms)
tone Tone ON/OFF : 0 ~ 8000 (Unit : ms)
Example:
phone -print rbt
phone -ring 20 2000 4000 94
phone -rbt 480 440 8 8 2000 4000 2000 4000
phone -bt 620 480 8 8 500 500 500 500
phone -dt 440 350 8 8 500 1023 1023 1023
phone -flash 100 300
usr/config$
Parameters Usage:
print current call progress tone configurations (ring – ring
tone, rbt – ring back tone, bt – busy tone, dt – dial tone,
flash – flash ). This parameter should be accompanied with
tone type. For example:
-----------------------------------------------------------------------------------------------
usr/config$ phone -print rbt
Phone ring back tone paramter
Ringback Tone frequency high : 480
Ringback Tone frequency low : 440