Welltech FXSO Gateway In SIP V.1.2 - Manual (Page 78)

FXSO SIP Gateway User Manual Document Ver.: 102
Released Dec., 2004
76
100, and total digits is between 1 to 3, this call will be routed to FXS
TEL 1001, and if TEL 1001 is busy, call will be routed to another FXS
TEL.
2. route –ip dst 1 e164 1002
This command means incoming call from IP side will be routed to FXO
Line of number 1002.
3. route –fxs dst 1 e164 1002
This command means incoming call from FXS TELs will be routed to
FXO Line of number 1002.
4. route –fxo dst 2
This command means incoming call from FXO Lines will be routed to
IP side.
Note:
(1) When destination is IP side, SIP number doesn’t need to
determine. (Ex. route –fxs dst 2)
(2) If user doesn’t want to determine a specific port to route, SIP
number must set as “x”. (Ex. route –ip dst 1 e164 x)
(3) Default value: Incoming call from FXS and FXO ports will be
forward to IP side directly.
4.2.15 [prefix]
This command is for make rules for drop or inserts prefix digits.
----------------------------------------------------------------------------------------------
usr/config$ prefix
Prefix drop/insert information and configuration
Usage:
prefix -add [prefix number][drop number][insert digits]
prefix -delete index
prefix -modify index [prefix number][drop number][insert number]
prefix -print Prefix drop/insert information.
prefix The prefix of dialed number.
drop Drop prefix(Enable:1/Disable:0).
insert Insert digits.
Example:
prefix -add prefix 100 drop 1 insert 2000