Welltech FXSO Gateway In SIP V.1.2 - Manual (Page 53)

FXSO SIP Gateway User Manual Document Ver.: 102
Released Dec., 2004
51
3.17 ROM Upgrade
User could update the firmware just by the web configuration interface. There
are two type for the upgrading procedure. One is using the TFTP server,
another is using the FTP server. Please follow the step to update the gateway
firmware version. (see figure 3.23)
Figure 3.23 ROM Upgrade
u TFTP/FTP server IP Address – Put the ip address of the TFTP or FTP
server in this table.
u Target File name – Put the target file name in this table.
u Method – There are two upgrade methods for the upgrade procedure.
One is TFTP and another is FTP. Please change to correct method for the
upgrading.
u FTP Login – Please enter the login name and password for the FTP
upgrade method. This is necessary if user change the method to the FTP.
u Target File Type – Please pick up the correct file type for upgrading. If the
file name and the file type is unconformable, the upgrade procedure will
be failed.
u OK – Press the OK button if all the info above are correct. The unit will
start to download the firmware file from the TFTP or FTP and write to the
flash after the downloading.