Welltech FXSO Gateway In SIP V.1.2 - Manual (Page 37)

FXSO SIP Gateway User Manual Document Ver.: 102
Released Dec., 2004
35
3.8 Tone Setting
The Tone Setting is for the Tone detecting. The call will be dropped if the
pattern of the tone from PSTN side is as same as the pattern in the disconnect
tone table. The same result for the Ring Back Tone. User could define the
pattern of the disconnect tone if the disconnect tone from PSTN side is not the
standard tone. (see figure 3.8)
Figure 3.8: Tone Setting
u Disconnect To ne – Users could put the correct pattern of the disconnect
tone in this table. The call will be dropped if the tone from PSTN side is
match with these patterns. Users could have four tables for the disconnect
tone.
u Remote Ring Back Tone – User could adjust this table to help the FXSO
gateway to detect the Remote Ring Back Tone. There could be four tables
for the configuration.