Welltech FXSO Gateway In SIP V.1.2 - Manual (Page 71)

FXSO SIP Gateway User Manual Document Ver.: 102
Released Dec., 2004
69
-px Proxy server address. (Proxy IPv4 address or Proxy
dns name)
-pxport Proxy server port. (the port of proxy)
-outpx OutBoiund Proxy server address. (IPV4 address or
dns name)
-prefix Specify prefix string, use it when the UserID contains
alphabets
-line1 Line 1(TEL 1) SIP number.
-line2 Line 2(LINE 1) SIP number.
-line3 Line 3(TEL 2) SIP number.
-line4 Line 4(LINE 2) SIP number.
-expire The relative time after which the message expires
(0~65535).
-port SIP local UDP port number (5060~5070). Default :
5060
-rtp RTP port number (2326~65532). Default : 16384
Example:
sip -px 210.59.163.171 -line1 70 -line2 71 -line3 72 -line4 73
usr/config$
Parameters Usage:
-print print current h323 related settings
-mode alternatives for proxy or peer-to-peer mode (1=proxy mode;
0=peer-to-peer mode). If users select proxy mode, a valid
proxy is needed when Gateway is in operation.
-----------------------------------------------------------------------------------------------
usr/config$ sip –mode 0 (peer to peer mode)
-px to assign the ip address of the proxy when Gateway is in
proxy mode.
-pxport define the proxy port for the registration or call.
-prefix this will be prefix the alphabets before the sip line number.
-line1 assign FXS TEL1 number.
-line2 assign FXO Line1 number.
-line3 assign FXS TEL2 number.
-line4 assign FXO Line2 number.