Welltech FXSO Gateway In SIP V.1.2 - Manual (Page 27)

FXSO SIP Gateway User Manual Document Ver.: 102
Released Dec., 2004
25
Please configure to PPPoE if the ADSL is using the PPPoE type.
u HTTP Port – To configure the HTTP port for access this unit from the
remote side.
u DNS primary – To configure the first ip address for the DNS server.
u DNS secondary – To configure the second ip address for the DNS server.
u SNTP – Enable the SNTP server registering function if user wants to get
the correct time from the Command Line Interface.
u SNTP Server Address – Enter the correct ip address of the SNTP server
or get the incorrect time from the Command Line Interface.
u GMT – Configuring the time area for the time display in the Command
Line Interface.
u IP Sharing – Enable this function if the gateway is behind the IP sharing
device.
u IP Sharing Server Address – Enter the WAN IP address of the IP sharing
device if it is the fixed ip.
u PPPoE User Name – To configure the user name for the PPPoE
connection.
u PPPoE Password – To configure the password for the PPPoE connection.
u PPPoE IP Address – In the PPPoE mode, this table will show the ip
address that this unit gets from the ISP.
u PPPoE Destination – In the PPPoE mode, this table will show the default
gateway address that this unit gets from the ISP.
u PPPoE DNS primary – In the PPPoE mode, this table will show the DNS
ip address that this unit gets from the ISP.
u After Remote Host Disconnection – This unit will reboot and re-connect to
the ISP