Welltech FXSO Gateway In SIP V.1.2 - Manual (Page 72)

FXSO SIP Gateway User Manual Document Ver.: 102
Released Dec., 2004
70
Note:
User can also set “x” in line number to disable the port. If the port is
disabled, it can only receive calls but not calling out.
Note:
1. This is for 3702, for 3701 model, there are only line1 and line2
command.
2. No matter in Proxy or P2P mode, user only needs to dial line number
to reach local port. For example, in P2P mode, user wants to dial from
FXS TEL1 to FXO Line1, only need to dial number of line2.
-expire It just like the TTL function in H323, the gateway will make
sure the registration is success or not for a period times.
-port define the local sip port for this gateway.
-rtp to allocate RTP port range— NOT RECOMMENDED. This
may be used when RTP port range conflicts with Firewall
policy. (each port of Gateway use 2 RTP ports)
4.2.12 [security]
This is the authentication for the SIP account.
----------------------------------------------------------------------------------------------
usr/config$ security
Secuirty information and configuration
Usage:
security [-name username] [-password password]
security -print
-print Display system account information and configuration.
-line Specify which line number you want to set the account.
-name Specify user name.
-password Specify password.
Example:
security -line 1 -name kkk -password 12345
Parameter Usages:
-print print out all current settings of security.