Welltech FXSO Gateway In SIP V.1.2 - Manual (Page 24)

FXSO SIP Gateway User Manual Document Ver.: 102
Released Dec., 2004
22
300 Enable X X
400 Enable 500 500
※ X – Do not enter any numbers
2.4.2 Configure the gateway into the Proxy mode
1
Enter the SIP Config table and change the mode from Peer-to-Peer to Proxy.
To change the Proxy information from your service provider (Ex: The Proxy
IP, Domain and Line numbers). (see figure 2.17)
Figure 2.17: Configure the Proxy info
2
Press the OK button that is on the bottom of this page to save the
configuration.
3
Switch to the Security Config page and put the user account and password
in the correct table. Please get this info from your ITSP. Press the OK
button if the configuration is finished. (see figure 2.20)