Welltech FXSO Gateway In SIP V.1.2 - Manual (Page 65)

FXSO SIP Gateway User Manual Document Ver.: 102
Released Dec., 2004
63
HTTPD initialized...
VoicePacketizermain comming
WorkMode : PROXY_MODE
incoming InitCallArray....REAL_MAXCALL=4
SIP stack was constructed successfully. Version - 2.2.1.8
Start registering to Proxy server
AC4804[0] is ok
successful 1 4
Initialize OSS libraries...OK!
VP v1.44 stack open sucessfully.
login:
4.2.5 [flash]
This command will clean the configuration stored in the flash ROM and
reboot Gateway in factory default setting.
Parameter Usage:
-clean clean all the user defined values, and reboot Gateway in
factory default mode.
Note: It is recommended that use “flash –clean” after application firmware
id upgraded.
Warning : Only user who login with root can execute this command.
Configurations of IP address and accounts’ passwords will be
kept.
4.2.6 [commit]
Save changes after configuring Gateway.
-----------------------------------------------------------------------------------------------
usr/config$ commit
This may take a few seconds, please wait....
Commit to flash memory ok!
usr/config$
Note: Users shall use commit to save modified value, or they will not be