Welltech FXSO Gateway In SIP V.1.2 - Manual (Page 26)

FXSO SIP Gateway User Manual Document Ver.: 102
Released Dec., 2004
24
3. Advanced
There are too many advanced commands for the advanced users. The
following chapters are based on the application layer. Please get the info what
you need. If you need the command, please watching the chapter of Command
Line Interface.
3.1 Network Interface
Users have to configure the Network configurations in this page. This gateway
will be work while it is connecting with the internet network. Please get more
info from the following descriptions. (see figure 3.1)
Figure 3.1: Network Interface
u IP Address – Define the ip address for your networking if it is the fixed ip.
Please get this info from your ISP.
u Subnet Mask – Define the mask address for your networking. Please get
this info from your ISP.
u Default Routing Gateway – Define the default gateway for your networking.
Please get this info from your ISP.
u IP Mode – To configure the fixed or dynamic ip address for this unit.