Welltech FXSO Gateway In SIP V.1.2 - Manual (Page 32)

FXSO SIP Gateway User Manual Document Ver.: 102
Released Dec., 2004
30
n No Answer Forward – This selection will enable the no answer
forward function. Every call will be routed to another destination if the
call didn’t answer by someone.
u Fwd Number – Please put the number for the call forwarding in this table.
u Registration – To show the gateway registered on the GK or not.
u Status – To show the port is busy or ready.
The no answer forward function should be used with the forwardtime
command (in the System configuration table). The range of the forward time
is 5 to 65535. If the function is enabling , the No Answer forward number is
123, and the forward time is 5 seconds. The call will be forwarded to the
destination with 123 numbers when the origin port didn’t answer the call.
The busy forward couldn’t be work if users define the hunt group function.
This will be work without the hunt group. Please make sure about that the
group number is different before you enable the busy forward function.
The no answer forward function could support the IP or PSTN side. If users
want the calls routed to the PSTN side, please define the routing table for
some special number.