Welltech FXSO Gateway In SIP V.1.2 - Manual (Page 21)

FXSO SIP Gateway User Manual Document Ver.: 102
Released Dec., 2004
19
Figure 2.12: Enter the Account and password
2
Please commit the data and reboot the machine after you finished the
configuration about the PPPoE function.
2.4 Making a VoIP Call
There are two modes that you could configure the gateway for making VoIP
calls. One is the Peer-to-Peer mode, another is Proxy mode. The
configurations and functions are different. Please make sure about the mode
you want and follow up the step to configure your gateway.
2.4.1 Configure the gateway into the Peer-to-Peer mode
1
Enter the SIP Configuration table and change the mode to Peer-to-Peer.
Define the port numbers whatever you like. Press the “OK” button if the
configuration is all finished. (see figure 2.13)
Figure 2.13: Configure the Peer-to-Peer mode
2
Enter the Phone Book configuration table and configure the name, ip
address and phone number of the destination. (see figure 2.14)