Welltech FXSO Gateway In SIP V.1.2 - Manual (Page 31)

FXSO SIP Gateway User Manual Document Ver.: 102
Released Dec., 2004
29
3.4 Line Configuration
The Line configuration will show the status of the registrations and the ports. It
includes the hunt group, hotline, and no answer forward configuration. Press
the Line configuration button to enter configuration table (see figure 3.4)
Figure 3.4: Line Configuration
u Type – Show the type of this port. There are only two types of this gateway.
One is FXS type another is FXO type. It couldn’t be changed.
u Hunting Group – Define the group number of this port. When the port is
busy, the call could be transferred to another port in the same group.
u Hotline – Enable or Disable the hotline mode. The hotline mode will be
enabled if you enter the hotline number. The default setting is disabled.
u FWD Type – This version could support the call forward with the Proxy.
Users could define the forward type in this table. The call forward could
only support the FXS port as so far.
n Disable – This selection will make the forward function disabled.
n Un conditional – This selection will enable the un-conditional forward
function. Every call will be routed to another destination whatever the
port is busy or not.
n Busy – The selection will enable the busy forward function. Every call
will be routed to another destination if this port is busy.