Welltech WG2504 FXS V.4.02 - Manual (Page 93)

93
Example:
1.
Set the domain name to welltech.com and primary proxy to
192.168.18.247, primary proxy port to 8888,outbound proxy to
192.168.18.247, outbound proxy port to 8888.
This command is
“[bdb -i Line -a px -v
welltech.com,192.168.18.247,8888,192.168.18.247,8888,,0,,0,120,0,
0,0,0,0,0]”
Notice: please input completely command line, there should have 15
commas(,).
2.
Read Sip Proxy values
This command is [bdb -i Line -a px]
SIP Trunk
item
keyword prefix Values and description
SIP Trunk
SipTrunk
1~4
According
the sip
trunk ID
Below in accordance with the priority
arrangement
Trunk ID, Register Type, 0, Domain,
Proxy Server, Proxy Server Port,
Outbound Proxy Server,
Outbound Proxy Server Port,
Register Expires,
TEL No, User ID,
User Password, Display Name,
Reject Anonymous Call, Display Name,
User ID, For DNIS is Register TEL,
Keep Alive, Keep Alive Time (sec), 0
Each option values description
 Trunk ID: this Trunk ID number from 1 to 4.
 Register Type: 0 is register , 1 is predefine
 0: it is reserved option, please don’t change this value.
 Domain: this proxy domain name
 Proxy Server: this proxy server IP address