Welltech WG2504 FXS V.4.02 - Manual (Page 71)

71
Enter HOT LINE TEL field to 1003 which is WellGate 2540 FXO port 3 number.
(This command let FXS port #3 point to remote FXO port #3 directly.)
Enter
HOT LINE TEL field to 1004 which is WellGate 2540 FXO port 4 number.
(This command let FXS port #4 point to remote FXO port #4 directly.)
Step 3: Go to
Modify Line Setting webpage (See Figure 4) of FXS gateway at
Port #1 (LINE ID 1) to continue setting of port #1.
Select Register Type to “
Internal ”. Enter FXS port #1 information as follows.
TEL No : 501
User ID : 501
User password: 501
Display Name: 501
Enter FXS port #2 information as follows.
TEL No : 502
User ID : 502
User password: 502
Display Name: 502
Enter FXS port #3 information as follows.
TEL No : 503
User ID : 503
User password: 503
Display Name: 503
Enter FXS port #4 information as follows.
TEL No : 504
User ID : 504
User password: 504
Display Name: 504
Step 4: Select HOT Line to
Enable at webpage (See Figure 4) of Line Setting
at FXS Gateway. And enter HOT Line TEL at 1001 which is Wellgate 2540 FXO
port #1 number.
For example:
The FXS port 1 number is 501, FXS port 2 is 502, FXS port 3 is 503, FXS port
4 is 504.
FXS port 1 number 501 hotline to FXO SIP Trunk 1 which number is 1001,
FXS port 2 number 502 hotline to FXO SIP Trunk 2 which number is 1002,
FXS port 3 number 503 hotline to FXO SIP Trunk 3 which number is 1003,
FXS port 4 number 504 hotline to FXO SIP Trunk 4 which number is 1004,
See Figure 3.