Welltech WG2504 FXS V.4.02 - Manual (Page 43)

43
CH6 Dialing Plan
6-1 General
Figure 6-1 General setting
 First Digit Time Out: Specify the duration of dial waiting when the
receiver is off hook. The range is 1~60 sec.
 Inter Digit Time Out: Specify the interval of input digits, if the
interval is over the setting, the system will end the dial and send out
the DTMF. The limitation
range is 1~10sec
.
 End of Digit: The assigned key will be tread as end of dial.
 Retrieve Number: it will forced to get back line, if used Wellgate 2504
make transfer to other devices but the devices no answer and into
voice mail,
You can press the code forced to get back line. Default is “*#”.