Ch9 route plan – Welltech WG2504 FXS V.4.02 User Manual

Page 56

CH9 Route Plan

The core of Wellgate 2504 is the routing policy. The policy is based on
incoming call type/target, length and prefix to determinate the
outgoing call process. For VOIP incoming call, it can send to FXS
interface and vice versa.

For FXS interface, it could be routed to VOIP and vice versa. You can ignore the
routing plan if you don’t need it for FXS interface.

Figure 9-0 Route Plan page

 Incoming Call Type: Incoming call type (VOIP or FXS)
 Matched Prefix: matched DNIS (called number) prefix
 Matched Incoming List: matched DNIS incoming interface target
 Matched Length: matched DNIS (called number) length
 Outgoing Type: The outgoing call type (FXS or VOIP)

This manual is related to the following products:

WG2424s FXS V.4.02 WG2424o FXO V.4.02 WG2424o FXO V.2.09a WG2424s FXS V.2.09a WG2522 V.4.02 WG2522 V.2.09a WG2540 FXO V.4.02 WG2504 FXS V.2.09a WG2540 FXO V.2.09a WG2844 V.1.01 WG2880 V.1.01 WG2808 V.1.01 WellGate M4