Welltech WG2504 FXS V.4.02 - Manual (Page 14)

14
CH2 Device Settings
From this setting category, all devices related parameters can be found here.
2-1 Network Configuration
> Network
Figure 2-1 network setting
Parameter Description:
WAN Setting:

Network Type: support “Fixed IP”;”DHCP”;”PPPOE”
 IP Address : IP address
 Default Gateway: Default gateway
 DHCP Tag (option 60): input Vendor class identifier or not.
 DHCP Tag (option 61): input Client identifier or not.
 DNS Server1: Primary DNS Server IP network
 DNS Server2: Secondary DNS Server IP network
 VOIP VLAN: Enable VOIP VLAN or not. When enable VOIP VLAN, the
WAN port can be only accessed by VLAN. If it is required to manage the
Wellgate 2504, Administrator can use LAN port instead.
 VOIP VLAN ID(2-4096): VLAN ID Used
Note: the default WAN IP address is 10.1.1.3.