Welltech WG2504 FXS V.4.02 User Manual

Page 9

clicking Apply button as fig (See Figure 1-6-3 Network configure-2).

Note: If Gateway WAN port are setting in the 10.x.x.x segment, please make

sure that you also change the LAN port to other segment such as 192.168.x.x

Figure 1-6-3 Network configure-2

Change Default Time setting:

Step 4: When re-logon to the new IP address, the next is to setup the system
time zone. Click

Device Setting > Time

to setup the system. Enter the

current SNTP server, time zone and daylight saving parameters. Apply the
change by clicking

Apply

button. (See figure 1-6-4 Time setting)

Figure 1-6-4 Time setting

Modify SIP Account Parameter:

Step 5: The next step is to add a SIP trunk for VOIP calling. For Wellgate 2540,
it is necessary for VOIP calling while wellgate 2504 is optional. Click SIP
trunk and new to

create the required sip trunk. Enter the trunk ID to 1 and

This manual is related to the following products:

WG2424s FXS V.4.02 WG2424o FXO V.4.02 WG2424o FXO V.2.09a WG2424s FXS V.2.09a WG2522 V.4.02 WG2522 V.2.09a WG2540 FXO V.4.02 WG2504 FXS V.2.09a WG2540 FXO V.2.09a WG2844 V.1.01 WG2880 V.1.01 WG2808 V.1.01 WellGate M4