Welltech WG2504 FXS V.4.02 User Manual
Page 55

55
set in this SIP trunk.
SIP user ID: If the SIP user ID is set, the SIP user ID set in this
SIP trunk will be used and the domain/SIP proxy will be the host
part. The SIP FROM header’s URL will be the
SIP_User_ID@Domain or SIP_User_ID@SIP_Proxy_Server.
Keep Alive: Enable or Disable it.
Keep Alive Time (sec): Specify of times send sip register message to
proxy server.
Proxy Network Type: the sip server IP is IPv4 or IPv6.
Note: please don’t delete sip trunk, even it is not be used, because it have to
be used with Route plan.
This manual is related to the following products: