Ch3 nat setting, 1 dhcp ser. (dhcp server) – Welltech WG2504 FXS V.4.02 User Manual

Page 24

Text mode
Original mode

CH3 NAT Setting

The Wellgate 2504 can support NAT, 2 ethernet leg (gw) or bridge mode. Here
are the settings for NAT related service.

3-1 DHCP Ser. (DHCP server)

Figure 3-1 DHCP server

 DHCP Server: Enable DHCP server or not.
 Client Range Start IP: specify DHCP client lease start IP
 Client Range End IP: specify DHCP client lease end IP
 Default Gateway: specify the default gateway
 Submask: specify the submask.
 DNS Server 1: specify the DNS server
 DNS Server 2: specify the DNS server

This manual is related to the following products:

WG2424s FXS V.4.02 WG2424o FXO V.4.02 WG2424o FXO V.2.09a WG2424s FXS V.2.09a WG2522 V.4.02 WG2522 V.2.09a WG2540 FXO V.4.02 WG2504 FXS V.2.09a WG2540 FXO V.2.09a WG2844 V.1.01 WG2880 V.1.01 WG2808 V.1.01 WellGate M4