Welltech WG2504 FXS V.4.02 - Manual (Page 57)

57
9-1 Create Route Plan
Click Route Plan and Click new to create a new routing policy.
Figure 9-1 Route Plan setting
 Incoming Call Type: Incoming call type
 VOIP: The incoming SIP call type
 FXS: The FXS extensions incoming call type
 Matched Prefix: matched DNIS (called number) prefix
 Matched Incoming List: matched DNIS incoming interface target
 For FXS incoming call type, the incoming target will be
the line ID (T1 to T24). Only the call is coming from the
selected line will be accepted for this route.
 Matched Length: matched DNIS (called number) length. For ignoring
the length, please set to 0.
 No Answer Timeout: How long the hunting will continue to next
when the called target doesn’t answer.
Create Route Plan>Primary Route
 Outgoing Type: Outgoing call type (FXS or VOIP)
 Hunting Type: The hunting method will be used for this route.
 Priority Ring: The call will be hunted based on the
routing list order one by one.
 Cyclic Ring: The call will be hunted based on the cyclic