Welltech WG2504 FXS V.4.02 User Manual

Page 8

Text mode
Original mode

Figure 1-6-1 web access

Step 2: After login, the screen shows the Home page of Wellgate 2504. (See
figure 1-6-2 Network configure-1)

Figure 1-6-2 Network configure-1

Change Default IP Network:

Step 3: After successfully logon to the system, we need to change the
network configuration. Click Device Setting > Network to setup the service
network interface (WAN) parameters. Enter the deserved IP address, netmask
and default gateway or selected to “DHCP” or “PPPOE”. Apply the change by

This manual is related to the following products:

WG2424s FXS V.4.02 WG2424o FXO V.4.02 WG2424o FXO V.2.09a WG2424s FXS V.2.09a WG2522 V.4.02 WG2522 V.2.09a WG2540 FXO V.4.02 WG2504 FXS V.2.09a WG2540 FXO V.2.09a WG2844 V.1.01 WG2880 V.1.01 WG2808 V.1.01 WellGate M4