Welltech WG2504 FXS V.4.02 - Manual (Page 45)

45
6-3 Digit Manipulation
The Digit Manipulation will be processed based on prefix and DM group after
the DNIS is determined.
Figure 6-3 Digit Manipulation setting
 DM Group: Different DM group have different case to be used.
 FXS: This DM group is used for FXS dialing out.
 VOIP: This DM group is used for VOIP incoming call. After the
DNIS is collected in 2 stage dialing or 1 stage dialing DNIS, this
DM group will be processed before enter the routing procedure.
 1-4: These DM groups are used for backup routing purpose.
When a backup routing is used, the administrator can select a
DM group to be processed before start the backup route.
 Matched Prefix: The prefix to be matched for DM. The longest prefix
will be matched first.
 Matched Length: Set to 0 for ignoring the length. The other 1-32 are
the length to be matched as a condition.
 Start Pos: The start position to be replaced.
 Stop Pos: The stop position to be replaced.
 Replace Value: The value to replace.
Example of Digit Manipulation Settings:
Prefix Len Start
Pos
Stop
Pos
Replace
Value
Test DNIS Result DNIS
886 0 0 0 002 8862123456 0028862123456
886 12 0 0 002 8862123456 8862123456
886 0 2 5 002 8862123456 8800223456
886 0 30 30 002 8862123456 8862123456002