Wavetronix SmartSensor Advance Extended Range (SS-200E) - User Guide - Manual (Page 56)

CHAPTER 4 • COMMUNICATION 55
Figure 4.16 – Sensor Firmware Downgrade
The most recent version of SSMA can be obtained from the Wavetronix website (www.
wavetronix.com) under the Support tab.
Converting Detection Zones from Previous Software Versions
Previous versions of the SSMA software supported 8 zones. SSMA version 2.0 and later sup-
ports 128 zones (8 channels, 4 alerts per channel and 4 zones per alert).
During the firmware upgrade process, SSMA will determine if the sensor is running any
previous versions. If this is the case, the SSMA software will display a message asking you
to convert the configuration. If you choose to convert the configuration, the SSMA software
will create a new configuration out of the previous existing configuration; if you choose
NOT to convert, a default configuration will be created.
Note
You can use command line arguments to perform a batch upgrade of sensors. See
Appendix E for information about command line arguments.