Wavetronix SmartSensor HD (101-0415) - Quick-reference Guide (Installer) User Manual
Smartsensor hd, Installer quick-reference guide, Select a mounting height
SmartSensor HD
INSTALLER QUICK-REFERENCE GUIDE
www.wavetronix.com
801.734.7200
2
Select a mounting height
1
Ensure that all necessary components are available
You will need a number of items in order to install your sensor, including but not limited to the items below:
Use the table to select
the mounting height
for the sensor based
on the offset from the
nearest detection lane.
The range of ideal
offsets is highlighted
in gray.
If possible, use the
mounting height con-
tained in the second
column, which is
marked Recommended
Mounting Height.
Introduction
Complete steps 1–10 to install the Wavetronix SmartSensor HD. If you need
technical support or have questions, please contact Wavetronix Technical
Services at 801.734.7200. For more information, see the SmartSensor HD
User Guide.
Offset from first
Detection Lane
(ft/m)
Recommended
Mounting Height
(ft/m)
Minimum
Mounting Height
(ft/m)
Maximum
Mounting Height
(ft/m)
6 / 1.8
12 / 3.7
9 / 2.7
19* / 5.8*
10 / 3
12 / 3.7
9 / 2.7
22 / 6.7
15 / 4.6
15 / 4.6
12 / 3.7
26 / 7.9
20 / 6
18 / 5.5
15 / 4.6
30 / 9.1
25 / 7.6
26 / 7.9
17 / 5.2
33 / 10
30 / 9.1
29 / 8.8
19 / 5.8
37 / 11.2
35 / 10.7
30 / 9.1
20 / 6
40 / 12.2
40 / 12.2
33 / 10
22 / 6.7
43 / 13.1
45 / 13.7
36 / 11
23 / 7
40 / 14
50 / 15.2
39 / 11.9
25 / 7.6
50 / 15.2
*Reduction in number of reported speeds
˽
Mount bracket and Band-It clamping system
˽
Sensor cable and homerun cable
˽
Click equipment and pole-mount box
˽
Laptop or PDA with SmartSensor Manager HD
˽
Bucket truck
˽
Pertinent documentation