Wavetronix SmartSensor Advance Extended Range (SS-200E) - User Guide - Manual (Page 41)

40 CHAPTER 3 • INSTALLING SMARTSENSOR MANAGER ADVANCE
Note
Microsoft .NET Framework version 3.5 or higher needs to be installed on your com-
puter before installing SSMHD. You can get the .NET Framework from the Microsoft
website.
Follow these steps to install SSMA on a PC:
1 To download the install file, go to the Wavetronix website at www.wavetronix.com.
2 Click the Support link near the top of the page. This will bring up a page with icons
from the three different Wavetronix product lines.
3 Click the SmartSensor icon. This will bring up drop-down menus allowing you to se-
lect a product by name or part number.
4 Select SmartSensor Advance and a list of links will appear.
5 Select the SmartSensor Manager Advance link (under Software) to download the
SSMA install file.
6 Once you’ve downloaded the file, double-click on it. This will execute a setup program
that will copy all the necessary files to the hard drive and place icons in the Start menu
and on the desktop of the PC or laptop (see Figure 3.1).
Figure 3.1 – SSMA Setup Wizard
7 Select an installation location. The default location provided is normally “C:\Program
Files\Wavetronix.” Click Browse to choose another location (see Figure 3.2).