Wavetronix SmartSensor Advance Extended Range (SS-200E) - User Guide User Manual

Page 74

CHAPTER 7 • CHANNELS-ALERTS-ZONES

Zone 1

Channel 1

Figure 7.3 – Simple Channel Hierarchy

To create a simple channel, select Simple from the Type drop-down menu and the follow-

ing screen will appear (see Figure 7.4):

Figure 7.4 – Simple Channel for Advance (left) and Advance Extended Range (right)

A simple channel allows you to configure the most basic zone settings. You can change the

size of the zone by either clicking and dragging the zone arrows anywhere along the road-

way or by using the up/down arrows in the Range (feet): field.

You can set the Speed and ETA settings by first clicking the Speed/ETA checkbox and then

setting the parameters using the up/down arrows. Click OK to save the changes you make

to each channel.

Note

Make sure that the

Speed/ETA checkboxes are checked before you click OK. If the

checkboxes are not checked, those settings will NOT be enabled.

The SmartSensor Advance is most commonly used with advance detection at signalized