Wavetronix SmartSensor Advance Extended Range (SS-200E) - Quick-reference Guide (Installer) - Manual

SmartSensor Advance
INSTALLER QUICK-REFERENCE GUIDE
www.wavetronix.com
801.734.7200
Suggested mounting locations:
1 Near-side vertical pole
2 Near-side luminaire
3 Back-side opposing mast arm
4 Front-side mast arm
2
Identify sensor’s location and pull homerun cable through conduit
1
Ensure that all necessary components are available
The components below, all of which can be ordered from Wavetronix, may be needed to install your sensor;
for more information on any of these, see the Wavetronix product catalog.
Introduction
Complete steps 1–9 to integrate the Wavetronix Advance detection system
into a signalized intersection. If you need technical support or have ques-
tions, please contact Wavetronix Technical Services at (801) 734-7200. For
more information, see the SmartSensor Advance User Guide.
A
A
B
D
C
B
1 3
4
2 50 feet
17 feet
30 feet
Sensor detection coverage:
A SmartSensor Advance
B Detection coverage
C Homerun cable
D Traffic cabinet
Sensor
Mounts
Sensor
Cables
Homerun
Cable
Rack Cards Preassembled
Backplate
Sensors Patch
Cords
Mount
brackets
Sensors Sensor
cables
Homerun
cable
Patch
cords
Rack
cards
Preassembled
backplate