Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 92)

3-64 T 1 A c c e s s R o u t e r
IP Entry Timer The maximum time (in seconds) NAT will use resources when not using
TCP, UDP, or ICMP.
Values: 0
−
65535
Default: 120
TCP Connection Timer The maximum time (in seconds) NAT will use resources when attempting to
establish a TCP connection.
Values: 0
−
65535
Default: 300
TCP Closing Timer The maximum time (in seconds) NAT will use resources when attempting to
close a TCP connection.
Values: 0
−
65535
Default: 0
TCP Disconnected
Timer
The maximum time (in seconds) NAT will use resources when attempting to
disconnect from TCP.
Values: 0
−
65535
Default: 120
TCP Sequence Delta
Timer
The maximum time (in seconds) NAT will use resources when managing TCP
Packet Sequencing.
Values: 0
−
65535
Default: 180
UDP Timer The maximum time (in seconds) NAT will use resources for a UDP port in
use.
Values: 0
−
65535
Default: 120
ICMP Timer The maximum time (in seconds) NAT will use resources for any ICMP
request.
Values: 0
−
65535
Default: 120
The NAT Details screen provides the following user-activated buttons:
Button Function
Submit Sets any values that have been changed.
Static TCP Translation Table Allows static mapping of global TCP Server ports to
a local host IP address/port combination.
Static UDP Translation Table Allows static mapping of global UDP Server ports to
a local host IP address/port combination.
NAT Port Table Defines NAT global/Internet and local/corporate
ports.