Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 150)

4-42 T 1 A c c e s s R o u t e r
Figure 4.35 Diagnostics Screen
Description Describes the type of interface selected for testing.
Loop Type Describes the type of loop test (if any) performed on the selected interface.
Setting Displays the bandwidth on which you wish to perform the BERT.
Pattern Specifies the pattern to be transmitted during a BERT for the selected port.
Length Displays the length of time for which the BERT should run for the selected
interface.
State Displays the current BERT state for the selected interface.
Test Details Screen
The Test Details screen (Figure 4.36) lets you set some test parameters and
view other read-only parameters. These screens are also used to initiate a
BERT or Loop Test.