Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 33)

W e b S e r v e r I n t e r f a c e 3-5
Interfaces
Your T1 Access Router unit includes the following interfaces: Network, 10/
100 Ethernet, and Supervisory. Each of these interfaces is described below.
Network
The T1 Access Router Network screen (Figure 3.4) lets you view and make
changes to the Network interfaces’ configuration as described below. In
addition, the screens provide a table that displays the alarm values for the
Network interfaces.
Figure 3.4 Network Screen
Mode Selects the network service type.
Values: Long Haul, Short Haul
Default: Long Haul
Line Build-Out (Long
Haul)
Sets the transmit Line Build Out (LBO) for the Long-Haul network interface.
Values: 0,
−
7.5,
−
15.0,
−
22.5 dB
Default: 0 dB
DSX Level (Short
Haul)
Specifies the DTE DSX-1 interface output level.
Values: 0
−
110, 111
−
220, 221
−
330, 331
−
440, 441
−
550, 551
−
660, >661 ft
Default: 0
−110
ft