Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 162)

4-54 T 1 A c c e s s R o u t e r
Figure 4.46 ARP Details Screen
Endpoint Endpoint name (or Interface) through which to send the IP packet to reach the
defined IP Address. The default is the LAN.
IP Address IP address of the circuit.
Values: 0.0.0.0
−
255.255.255.255
Default: 0.0.0.0
MAC Address The MAC address of the Host to be reached.
Values: A 6-byte value
Default: 00-00-00-00-00-00
ARP Status Displays whether this static ARP is enabled or disabled.
Values: Enable, Disable
Default: Enable
Trusted Neighbors Screen
The Trusted Neighbors feature can be used to store RIP information only
from a specific router. This allows the router to reject any RIP information
coming from non-Trusted Neighbors. Only information coming from Trusted
Neighbors is kept by the router. Access this menu by choosing Trusted
Neighbors from the IP Gateway menu. This table is useful when the Network
Administrator wants to listen to RIP of specific router(s).