Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 174)

4-66 T 1 A c c e s s R o u t e r
“Disable” will override an “Enable” parameter set under “Filter Non Local
Address” on the NAT Details menu.
Type Defines whether this port is local or global. Default is LAN global. All others
are local.
IP Address IP Address of this port. Default is the value defined in the IP Gateway Circuit
Table.
Mask Mask related to the defined IP Address. Default is the value defined in the IP
Gateway Circuit Table.
Endpoint The Endpoint name of the circuit associated with the LAN or WAN port.
Default is LAN for the first port.
The “Add New” prompt lets the user add additional ports.
Figure 4.62 NAT Port Details Screen
The NAT Port Details screen provides the following user-activated prompts:
The NAT Port Status screen shown below displays for each port the processed
packets from specific IP addresses.
Prompt Function
Delete Deletes the specified NAT Port.
Status Displays the NAT Port Status screen (Figure 4.63).