Frame relay service details screen, Frame relay service details screen -17 – Verilink T1 Access Router (34-00327) Product Manual User Manual
Page 125
![background image](https://www.manualsdir.com/files/808563/content/doc125.png)
V T 1 0 0 I n t e r f a c e
4-17
The Channel Table Details screen lets you establish the Rate, Service, and
Idle Pattern parameters for any available channel. The screen parameters are
described below.
Rate
The unit can operate at any data rate that is a multiple of 56 or 64 kbps.
Values: 56K, 64K
Default: 64K
Service
Specifies the service to which this channel is allocated. Refer to the Service
Table to see how the current services are configured.
Idle Pattern
Selects the DS0 idle pattern sent by the unit and lets the unit determine if the
DS0 idle pattern has been sent by the other end.
Values: 0
−
255
Default: 127
Frame Relay Service Details Screen
Access the Frame Relay Service Details screen (Figure 4.17) by selecting
“Frame Relay” under the
Figure 4.17
Frame Relay Service Details Screen
The Frame Relay Service Details screen displays Service, Pair, and Interface
details across the top of the screen. Fields shown at the top of the Frame
Relay Service Details screen are described below.
Field
Description
Active
Read-only status (No, Yes)
LMI Type
Read-only status
FrameStart Status
Read-only status