Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 185)

V T 1 0 0 I n t e r f a c e 4-77
Figure 4.75 SMTP Details Screen
Mail Server IP Address IP address of the mail server to which notifications will be sent.
Domain Name Name of domain where the device resides (i.e., Verilink.com)
Mail From E-mail address of the device (WANsuite). While the device will not be able to
retrieve e-mail from a service, the mail needs to have the “From” address
filled in.
NOTICE: There can be no blank space(s) in the “Mail From” address.
Recipient 1...5 E-mail addresses of recipients of event notifications (i.e., [email protected]
or [email protected])
Encryption
Encryption is not available on this unit.
TFTP Configuration
A Trivial File Transfer Protocol (TFTP) service on a server can provide
remote file access to the FrameStart FSM to
• Update the firmware
• Save the configuration setup
• Restore a saved configuration setup
To transfer a file to or from a TFTP server from a FrameStart FSM unit, you
must indicate the TFTP server’s IP address and file name, and then perform a
“Get” operation to receive a file from the server, or a “Put” operation to send
a file to the server. The file name and its extension determine the type of file
transferred.