Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 135)

V T 1 0 0 I n t e r f a c e 4-27
PAP Details Screen
To change the Username and Password for a selected PAP Index, access the
PAP Details screen by selecting the applicable index number in the PAP
Table. Enter the new information in the appropriate field(s) and press the
“Esc” key.
To delete the Username and Password for a selected PAP Index, delete the
character string displayed in both fields (leaving them blank) and press the
“Esc” key.
Figure 4.23 PAP Details Screen
CHAP Table and Details Screens
From the PPP Service Details screen, select “CHAP Table” to view a table of
the CHAP Username and Secret information for each of 10 entries. This table
and its Details screen look the same as the PAP Table and Details screens.
Choose an Index number to bring up a screen in which you can change the
Username and Secret information for that particular CHAP Index.
To change the Username and Secret for a selected CHAP Index, enter the new
information in the appropriate field(s) and press the “Esc” key.
IP Service Details Screen
The IP Service Details screen (Figure 4.10), accessed by selecting “IP” from
the column in the IP Service screen, lets you configure the IP
parameters described on page 4-12.
To change any of the available parameters, you must enter new values in the
appropriate field(s) and press the “Esc” key to save your changes.
NOTICE: To use newly established IP parameters, you must “Save and Restart.”
(See "Save and Restart" on page 4-6.)