Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 181)

V T 1 0 0 I n t e r f a c e 4-73
Figure 4.71 Bridge Details Screen
From this screen, you may view the parameters described below.
Enable Enables or disables Bridging capability.
Values: Enable, Disable
Default: Disable
Group Multicast MAC
Address
MAC Address recognized by the Bridge as the group address for the Bridge
Protocol Data Unit (BPDU) transfer between bridges.
Values: Any valid Group Multicast MAC Address
Default: 0180C2000000
Bridge ID Consists of a bridge priority and its own MAC Address.
Values: 1
−
65535
Default: 2
Hello Timer Specifies the BPDU broadcasting interval.
Values: 1
−
65535 s
Default: 10 s
Max Age Timer Specifies the length of time a bridge will consider the network topology held
in memory as valid.
Values: 1
−
65535 s
Default: 60 s
Forward Delay Specifies the length of time to delay creation of a temporary loop in the
network.
Values: 1
−
65535 s
Default: 5 s
Filter Ageing Timer Specifies the length of time an entry in the lookup table will be held if no
traffic is received from the specified MAC Address.
Values: 1
−
65535 s
Default: 300 s