Verilink T1 Access Router (34-00327) Product Manual - Manual (Page 41)

W e b S e r v e r I n t e r f a c e 3-13
Figure 3.11 Unit Access Details
Supervisory
The Supervisory interface’s screen (Figure 3.12) displays the current speed of
the Supervisory port interface and other parameters as described below.
Figure 3.12 Supervisory Screen
Click on the “Supervisory Services” button at the bottom of the screen to
view service information for the Supervisory interface.
Speed Changes the Supervisory port speed (in bits per second).
Values: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Default: 19200
Character Size Selects the number of bits required to make up one asynchronous character.
Values: Five, Six, Seven, Eight
Default: Eight
Diagnostic Messages Enables the Supervisory port to send out diagnostic messages upon power-up.
Values: Enable, Disable
Default: Enable
Parity Sets the parity bit.
Values: None, Odd, Even
Default: None