Verilink DPRI 2922 (880-503142-001) Product Manual - Manual (Page 76)

Configuring the DPRI 2922 Via the NCM 2000 Craft Interface
3-46
Verilink DPRI 2922
Manufacturing Info
To display the firmware versions and CIM types, choose I from the
Main Menu. The Manufacturing Information screen displays. To
exit this screen, press E
NTER .
Figure 3-33 Manufacturing Information
SE src err mask—Backup when SRC port set: 1) ais
2) yel
3) los
4) lof
5) uas/ses
C dst call ref—Dial-out profile
DE dst err mask—Backup when DST port set: 1) ais
2) yel
3) los
4) lof
5) uas/ses
O dbkp timeout—Backup circuit timeout Day (max 5
days) Hour (max
23 hrs)
Min (max 59
min)
G err clr mask—Switch back when clear 1) ais
2) yel
3) los
4) lof
5) uas/ses
S Setup—This option MUST be selected to set the new configurations. If this
option is not selected, the card reverts to the previous configuration.
X Exit—exits this menu and displays the Circuit Manager Menu, Figure 3-28,
Table 3-23.
Command Description Options
A [127.255.255.0] [1,2] DPRI 2922 > i
MANUFACTURING INFORMATION
Main Card CIM
Revision RM) C RC)
Date DM) 3/6/97 DC) 2/5/97
Serial number SM) 00649488 SC) 00648368
Manuf. Part No. MM) 319101776002 MC) 311101387001
Cage Code CM) CC)
Type TM) DIDCSU TC) CIM29010
Press enter to continue