Verilink DPRI 2922 (880-503142-001) Product Manual - Manual (Page 67)

Configuring the DPRI 2922 Via the NCM 2000 Craft Interface
Verilink DPRI 2922
3-37
Net Port Alarm
Theshold Status
Menu
To display the Net Port Alarm Threshold Status Menu, enter S in
the Net Port Alarm Menu. This alarm register shows all major and
minor alarms that have occurred at each port. When an alarm is
cleared, the time stamp changes to reflect the time the alarm was
cleared.
This screen only displays information. You cannot change any of
the settings displayed via this screen. The settings must be
changed using the Net Port Alarm Threshold Configuration Menu
accessed through the Net Port Alarm Menu, Figure 3-25, option C.
En Errored Seconds (ES) 15 min. Threshold/ES 24 hr. Threshold: An ES alarm
indicates a second with one or more ESF error events.
15 minute
Threshold:
1—900
0 to disable
24 hour
Threshold:
1—86400
0 to disable
Sn Severely Errored Second (SES) 15 min. Threshold/SES 24 hr. Threshold: Select
15-minute and 24-hour threshold values.
15 minute
Threshold:
1—900
0 to disable
24 hour
Threshold:
1—86400
0 to disable
Tn Bit Error Rate (BER) Threshold: Selecting 10 -9 will report more errors than 10 -4 . 1) DISABLE
2) 10E-4
3) 10E-5
4) 10E-6
5) 10E-7
6) 10E-8
7) 10E-9
X Exit this screen—Returns you to the Net Port Alarm Menu, Figure 3-25, Table
3-21.
Command Description Options