Verilink DPRI 2922 (880-503142-001) Product Manual - Manual (Page 13)

BACK HOME GLOSSARY INDEX DPRI 2922 Dual-Port ISDN Primary Rate In-
Verilink DPRI 2922
1-3
Node
Management
The NCM provides node management via Craft interface, Telnet,
SNMP, and Verilink’s Node Manager.
Diagnostics The DPRI provides line (LLB), data port (DPLB), repeater (RLB), and
payload (PLB) loopbacks. Test patterns can be used with or without
the loopbacks.
System Components
Hardware components of the DPRI 2922 system include:
• NCM 2000 (Version 4.0 or higher firmware) with accompanying
NIM
• Dual-Port Primary Rate Interface (DPRI) ISDN module
• Connector interface modules (CIMs)
• CIM 29010 (P/N 311-101387-001) or
• CIM 29011 (P/N 311-107387-002)
• Universal power supply and shelf
• System cables (Craft Cable P/N 458-501788-008)
DPRI 2922 Front
Module
Figure 1-2 shows the front panel of the DPRI 2922.
Figure 1-2 Dual Port ISDN Primary Rate Interface (DPRI 2922) Front Panel
LEDs The DPRI front panel’s System LED (SYS) is green when the module
has passed the power-up self-test.
The panel also contains four status LEDs:
• Two for network port status
DPRI
2922
LOCAL
SY
S
MANAGEMENT
PRI EXT
✳ ✳ ✳ ✳ ✳
Craft Port, RJ-11
Primary ACP Management port for direct connection to PC running
ACP Management communications port to extend bus to another shelf, RJ-45
Node Manager, RJ-45
NET DATA
1 2 1 2
Ejector Handles