Verilink DPRI 2922 (880-503142-001) Product Manual - Manual (Page 22)

Quick Set-Up
2-6 Verilink DPRI 2922
Figure 2-4 Configuration Menu (FDL Options)
2. Press S, then 1, E NTER , to assign the FDL Standard to Network
Port 1. Press S, then 2, E NTER , to assign the FDL Standard to
Network Port 2.
Options available for the FDL Standard are TR54016, T1.403,
or BOTH. This option determines how the network service
provider examines and resets the ESF registers. Select the
TR54016 option if your service provider is AT&T. Select
T1.403 if your service provider is any other provider.
3. Press M, then the port number to show options for the FDL
Mode. Currently, TERM is the only one supported. PASS is NOT
supported.
4. Press P, then the port number to show options for the Poll
Mode. Your options are POLL, NO POLL, and UNSOLICT. The
above display shows that NO POLL has been selected.
5. Press C, then the port number to show options for the PRM C/R
bit. Your options are NONE, USER, and TELCO.
6. Press I, then the port number to show options for the Idle
Pattern. Options for this parameter are ALL ONES or FLAGS.
The above display shows the FLAGS option.
7. Press A, then the port number for the prompt whether you
want to send/receive ANSI BOP LLB.
8. Press B, then the port number for the prompt whether you
want to send/receive ANSI BOP PLB.
Timing Options 1. When the FDL options have been selected, return to the
Configuration Menu and then select T for the Configuration
Menu (Timing Options) submenu.
-- DIDCSU 2912 CONFIGURATION MENU (FDL OPTIONS)--
PORT 1 PORT 2
Sn) FDL Standard BOTH BOTH
Mn) FDL Mode TERM TERM
Pn) Poll Mode NO POLL NO POLL
Cn) PRM C/R bit NONE NONE
In) Idle Pattern FLAGS FLAGS
An) Send/Rec LLB BOP YES YES
Bn) Send/Rec PLB BOP YES YES
X) exit this screen
A [127.255.255.0] [1,2] DIDCSU 2912 >